Filter
Top Products
Placing Originals
1-34
1
Introduction to Fax Functions
Placing Originals
Place your originals on the platen glass or into the optional feeder, depending on
the size and type of the original, and the send settings that you have specified.
■ Platen Glass
Place the originals on the platen glass when scanning bound originals (such as books and
magazines), heavy or lightweight originals, and transparencies.
■ Feeder
Place the originals into the feeder when you want to scan several originals at the same
time, and press (Start). The machine automatically feeds the originals to the platen
glass and scans them. Two-sided originals can also be automatically turned over and
scanned as two-sided documents.
IMPORTANT
You can scan originals in the feeder only if the optional Feeder (DADF-N1) is attached.
Document Sizes
The size of the original is automatically detected, and the document is scanned. If
the output paper in the recipient's machine is not equal to the scanned size, the
original image may be reduced in size or divided into smaller parts before it is sent.
The machine cannot always detect the size of the original if it is a nonstandard
paper size, such as a book. In this case, specify the size at which you want to scan
the original. (See "Document Size," on p. 3-21.)