Canon 2237B001AA All in One Printer User Manual


 
xxiii
What Can I Do with This Machine?
Power Supply
Do not damage or modify the power cord. Also, do not place heavy objects on the power
cord, or pull on or excessively bend it, as this could cause electrical damage and result in
a fire or electrical shock.
Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.
Do not connect or disconnect the power cord with wet hands, as this may result in
electrical shock.
Do not connect the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical
shock.
Insert the power plug completely into the power outlet, as failure to do so may result in a
fire or electrical shock.
Do not use power cords other than the power cord provided, as this may result in a fire or
electrical shock.
As a general rule, do not use extension cords. Using an extension cord may result in a fire
or electrical shock. If an extension cord must be used, however, use one rated for voltages
of 120 V AC and over, untie the cord binding, and insert the power plug completely into
the extension cord outlet to ensure a firm connection between the power cord and the
extension cord.
Do not use power supplies with voltages other than those specified herein, as this may
result in a fire or electrical shock.
Always grasp the power plug when disconnecting the power cord. Pulling on the power
cord may expose or snap the core wire, or otherwise damage the power cord. If the
power cord is damaged, this could cause current to leak, resulting in a fire or electrical
shock.
Leave sufficient space around the power plug so that it can be unplugged easily.
If objects are placed around the power plug, you will be unable to unplug it in an
emergency.
Make sure that the power supply for the machine is safe, and has a steady voltage.
Do not connect other electrical equipment to the same power outlet to which the
machine is connected.