Filter
Top Products
99
Noise Not more than 40 dB
Operating Environment
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH
AC Adapter (100 to 240 V type)
Model Number MG1-4578
Input AC 100 to 240 V, 50/60 Hz, 0.3 to 0.53 A
Output DC 16 V, 1.8 A
Weight Approximately 0.2 kg (0.44 lb) (excluding power
cord)
Replacement parts
Exchange roller kit (product code: 5484B001)
Kit to replace the rollers (feed roller, retard roller) and document
holding guide.
• For the replacement procedure, see “Replacing Consumable Parts”
on p. 83.
• Contact your local authorized Canon dealer or service
representative for detailed information about the replacement parts.
Option
Flatbed Scanner Unit 101 (product code: 4101B001)
Flatbed scanner unit that can be connected to and used with a DR
scanner. Connecting the unit to this scanner enables you to use this
scanner as a flatbed scanner with an automatic document feeder.
Specifications are subject to change without notice due to product
improvements.
About the Flatbed Scanner Unit 101
The optional Flatbed Scanner Unit 101 can be connected to and used
with this scanner.
System requirements
The computer must comply with the necessary system requirements
of Flatbed Scanner Unit 101.
The scanner driver of Flatbed Scanner Unit 101 needs to be installed
to use the unit.
Hint
The unit cannot be used with Mac OS X.
About Use with CaptureOnTouch
About Assigning Function to Start Button
When you connect Flatbed Scanner Unit 101, you can assign Scan
First of CaptureOnTouch or any job to the start button of Flatbed
Scanner Unit 101.
● When Scan First:
Scan First is assigned to the start button of both this scanner and
Flatbed Scanner Unit 101. This enables scanning to be started by
pressing the start button of the one where the document has been
placed.
● When job:
A different job can be assigned to the start button of each of this
scanner and Flatbed Scanner Unit 101.
Limitation of Full Auto Mode
When a document is scanned with Flatbed Scanner Unit 101, Full
Auto mode of CaptureOnTouch may not function effectively.
Limitation of Restarting with Start Button
When CaptureOnTouch is set not to be resident in memory,
CaptureOnTouch cannot be restarted by pressing the start button on
Flatbed Scanner Unit 101 after you end CaptureOnTouch.
About Scanner Driver Settings
If a function of this scanner cannot be selected in the settings dialog
box of the Flatbed Scanner Unit 101, click [Option] in the dialog box to
open the scanner driver for this scanner, and configure the functions
you want to use.