Filter
Top Products
8-6 Receiving Faxes Chapter 8
Receiving Faxes Manually: MANUAL MODE
Set this mode if you only have one telephone line that you use mainly for voice calls,
and only occasionally to receive faxes.
You can activate reception directly from your machine, or if your telephone is located
away from your machine, you can dial the remote receiving ID on the telephone to
activate reception (this is called Remote reception).
Setting MANUAL MODE
Follow this procedure to set the receive mode to MANUAL MODE:
1 Press Receive Mode repeatedly until
MANUAL MODE is displayed.
• After a few seconds, the LCD changes
to this display:
Receiving a Fax Manually
Follow this procedure to receive a fax manually:
1 Make sure Manual is displayed in the
LCD.
2 Make sure you have connected the
handset or extension telephone to
your machine (1 p. 2-8).
3 When you hear the handset or
extension telephone ring, pick up the
handset.
■ If you hear a long beep tone or silence:
4 Someone is trying to send you a fax.
Press Start/Copy on your machine
and hang up to begin receiving the
document.
• If you are using the extension telephone
and it is located away from your
machine, dial 25 (the default remote
receiving ID) on your telephone and
hang up.
12/27 Manual
12/27 Manual
MANUAL MODE