Filter
Top Products
Receiving Faxes
Chapter 7 Receiving Faxes
7-9
Receiving Faxes Manually: MANUAL MODE
To use this mode, you must have the handset or a telephone connected to
the LASER CLASS 2060P. In MANUAL MODE, the LASER CLASS 2060P
rings every time it receives a call, whether the call is from a telephone or a
fax machine.
Make sure the REMOTE RX setting in the RX SETTINGS menu is
enabled. See pages 15-9 and 15-11 for details.
If you use your LASER CLASS 2060P with MANUAL MODE, answer
incoming calls as follows:
1. When the handset or the telephone rings, pick up the receiver.
If you hear a person’s voice:
2. Start your conversation. If the caller wants to send a document after
talking to you, ask them to press the start button on their fax
machine. When you hear a slow beep, press Start/Copy to begin
receiving the document, then hang up.
If you hear a slow beep or silence:
2. A fax machine is trying to send you a document.
Press Start/Copy on the LASER CLASS 2060P, then hang up.
-or-
Enter the two-digit ID code from the telephone, then hang up.
❏ The LASER CLASS 2060P then begins receiving the document.
(This is particularly convenient if your telephone is located away
from the LASER CLASS 2060P.)
N
Start
/
Copy
Start
/
Copy
25
Ex:
07.Chapter 7.fm Page 9 Tuesday, May 29, 2001 4:46 PM