Canon 2060P All in One Printer User Manual


 
15-4
The Menu System Chapter 15
USER SETTINGS
1.DATE & TIME Set the date using the numeric buttons. Set the time (24-hour clock) using
the numeric buttons.
2.UNIT TELEPHONE # Enter your fax number using the numeric buttons. (Up to 20 digits.)
3.UNIT NAME This is the name that appears at the top of each fax page you send (up to 24
characters). See page 3-8.
4.TX TERMINAL ID Print your ID (transmitting terminal ID) on each page you transmit.
TTI POSITION
OUTSIDE IMAGE
Terminal ID prints outside the image border.
INSIDE IMAGE Terminal ID prints inside the image border.
TELEPHONE # MARK
You can prefix your number with the abbreviations FAX or TEL in your
sender ID.
FAX
Prefixes the number with the abbreviation FAX.
TEL Prefixes the number with the abbreviation TEL.
5.SCANNING CONTRAST Set the density of the reproduction.
LIGHTER LIGHTER for dark originals.
STANDARD
Originals.
DARKER DARKER for light originals.
6.OFFHOOK ALARM Turn the offhook alarm off or on, which alerts you if the handset is not in the
handset cradle.
ON
Offhook alarm sounds if handset or extension telephone is left off the hook.
OFF No offhook alarm.
7.VOLUME CONTROL Adjust the volume of the fax unit.
CALLING VOLUME
2
(1 to 3)
KEYPAD VOLUME
2
(0 to 3)
ALARM VOLUME
2
(0 to 3)
LINE MONITOR VOL.
2
(0 to 3)
8.RX CALL LEVEL Adjust the volume of incoming calls.
STANDARD Level of volume is standard.
HIGH
Level of volume is high.
9.TEL LINE TYPE Set the telephone line type.
TOUCH TONE
The telephone line is set for touch-tone dialing.
ROTARY PULSE The telephone line is set for rotary pulse dialing. If you need to dial into an
information service that requires tone dialing, use the
Tone
button on the
operation panel.
(Default settings are shown in
bold
type)