Filter
Top Products
13-32
Frequently Asked Questions Chapter 13
Receiving Faxes
Problem Possible cause Solution
The LASER CLASS
2060P cannot receive
faxes automatically?
The LASER CLASS 2060P
may not be set to receive
automatically.
For the LASER CLASS
2060P to receive faxes
automatically, it must be in
FAX ONLY MODE,
ANS.MACHINE MODE, or
Fax/Tel Mode. See page 7-2.
The LASER CLASS 2060P
may have a document in
memory, leaving very little or
no memory available.
Print out any documents
stored in memory.
See pages 7-12 and 7-13.
An error may have occurred
during reception.
Check the LCD display for
an error message. See page
13-40 for a listing of the
LASER CLASS 2060P’s error
messages.
Print an activity report and
look for an error code. See
page 12-2.
The paper cassette/the
multi-purpose tray may be
empty.
Make sure the paper
cassette/the multi-purpose
tray has paper in it.
The telephone line may not
be connected properly.
Make sure all telephone line
connections are secure.
The LASER CLASS
2060P will not switch
between telephone and
fax calls automatically?
The LASER CLASS 2060P
may not be in Fax/Tel Mode.
For the LASER CLASS
2060P to switch
automatically between
telephone and fax calls, it
must be in Fax/Tel Mode.
See page 7-2.
The LASER CLASS 2060P
may have a document in
memory, leaving very little or
no memory available.
Print out any documents
stored in memory. See pages
7-12 and 7-13.