Canon 730i All in One Printer User Manual


 
Chapter 3 Print media handling 3-5
3
Print media handling
–Do not store or display printouts in hot, damp, or humid conditions. Never expose them to
heat or direct sunlight.
Store printouts in photo albums, photo frames, or presentation binders to protect them from
direct exposure to air or sunlight.
–Do not mount printouts in an adhesive-type album as you may not be able to remove them.
–Be aware that some types of clear plastic folders and albums may cause the edges of the
paper to turn yellow.
Setting the paper thickness lever
The paper thickness lever adjusts the gap between the printhead and the print media to suit
the print media’s thickness. Before printing, be sure to set the paper thickness lever.
Follow this procedure to set the paper thickness lever:
1 Press [Open] q and lift up the scanning unit
w.
The printhead holder automatically moves to the
center of the machine.
CAUTION
Do not try to manually move or stop the
printhead holder.
Do not touch any metal parts.
2 Move the paper thickness lever to the
appropriate setting.
For details on which position to set for the print
media you are using, see pp. 3-1 to 3-4.
3 Close the scanning unit until it locks into
place.
q
w