Filter
Top Products
9-4 Receiving faxes Chapter 9
Receiving with a DRPD (Distinctive Ring Pattern
Detection) service: DRPD
Choose this mode if:
• you only have one telephone line for both fax and telephone use.
• you want to receive faxes automatically as well as voice calls.
• you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service with your
telephone company. This service assigns two or more telephone numbers with distinctive ring
patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone
number(s) using only one telephone line. Your machine will automatically monitor incoming
calls and based on the ring pattern, will let you know if the call is a fax or voice call. Contact
your telephone company for more information on this service.
You will need to:
• set <DRPD> ( p. 9-1).
• connect a telephone to your machine ( Set-up Sheet).
When you receive a fax call: The machine will ring according to the ring pattern you have
chosen and receive the fax automatically.
When you receive a voice call: The machine will ring according to the ring pattern you have
chosen. Pick up the handset to answer the call.
Setting the ring pattern
Your telephone company will assign a distinctive ring pattern to each number when you order
the DRPD service. Follow this procedure to set the fax ring pattern that matches the pattern
assigned by the telephone company:
1 Make sure you have set <DRPD> (
p. 9-1).
2 Press [Menu].
3 Use [22
22
] or [33
33
] to select <USER DATA>.
4 Press [Set].
5 Use [22
22
] or [33
33
] to select <FAX SETTINGS>.
6 Press [Set].
7 Use [22
22
] or [33
33
] to select <RX SETTINGS>.
8 Press [Set].
9 Use [22
22
] or [33
33
] to select <DRPD:SELECT FAX>.
USER DATA
1.TEL REGISTRATION
FAX SETTINGS
1.USER SETTINGS
RX SETTINGS
1.ECM RX