Filter
Top Products
1-10
Chapter 1 Before You Start Using the Scanner
3. Names and Functions of Parts
The names and functions of the DR-G1130/G1100 parts are shown below.
Front View, Feeder Inlet, and Eject Outlet
(1) Upper Unit
Open when cleaning the rollers or paper jams. (See p. 3-22.)
(2) Imprinter Cover
Open when replacing the ink cartridge in the optional
imprinter or when cleaning the imprinter. (See p. 5-16.)
(3) Document Eject Tray
Scanned documents are output here. (See p. 3-9.)
(4) Control Panel (See p. 1-12.)
(5) Power Switch
Turns the scanner ON and OFF. (See p. 2-8.)
(6) Document Eject Tray Extension
Open the Document Eject Tray Extension to prevent
documents from falling off of the eject tray. (See p. 3-9.)
(7) Eject Paper Stoppers
Adjust to fit the length of documents, to avoid document
spillage. (See p. 3-9.)
(8) Document Guides
Adjust to fit the width of documents, so that ejected
documents stack neatly. (See p. 3-9.)
(9) Document Guides
Adjust to fit the width of documents. (See p. 3-7 and
p. 3-8.)
(10)Document Guide Lock Lever
Locks the Document Guides. (See p. 3-8.)
(11)Document Feed Tray
Load documents to be scanned here. (See p. 3-5.)
(12)Document Feeder Tray Extension / Extension Wire
Extend as needed to fit the length of the documents. (See
p. 3-6.)
CAUTION
Do not open the imprinter cover if the optional imprinter is not installed.
(1)
(2)
(3)
(5)
(4)
(8)
(6)
(7)
(10)
(11)
(10)
(9)
(12)