Filter
Top Products
2-8
Chapter 2 Setup
5. Turning the Power ON
The power of the scanner can be turned ON and OFF with the power button on the front of the scanner.
1. Make sure that the scanner and computer are
connected properly with the supplied USB cable.
2. Press the power switch.
Hint
When the scanner is turned on for the first time, the balloon
message shown below appears on the Windows task bar. If you
wait a while, automatic scanner recognition will end and the
scanner will become ready to use.
Turning Off the Power
Press the power switch again to turn the scanner off.
IMPORTANT
• After turning the scanner off, wait at least 10 seconds before
turning it back on.
• If you will not be using the scanner for an extended period, you
should disconnect the power cord from the AC outlet for safety.
Hint
The scanner's Auto power OFF function is enabled by default,
and the scanner will turn off automatically if it is not operated for
4 hours.
To disable this setting, follow the steps in (See “Auto Power
OFF Function” on p. 5-6).
Power Switch