Filter
Top Products
3-21
Chapter 3 Basic Operation
IMPORTANT
If the patchcode decoder is not installed, the [Patchcode] batch
separation setting is not displayed.
4. Perform [Scan Batch to File].
5. Set the [Type of batch separation] setting to [Scan,
Continue Scanning] or [Skip, Continue Scanning].
Hint
• If [Scan, Continue Scanning] is selected or if the patchcode is
PATCH ll type, the patchcode sheet image is also saved and
scanning continues.
• If [Skip, Continue Scanning] is selected and the PATCH T
pattern is detected, the patchcode sheet image is not saved
and scanning continues.