Filter
Top Products
110
GENERAL
❏ Sending and receiving documents too slow?
When sending, is the document mode set to
FINE or PHOTO?
Is your fax set for ECM sending or receiving?
Before sending documents, press [Resolution]
until STANDARD appears on the display.
Sending will be faster, but the image will not be
as clear, and photos will be reproduced in black
and white only.
Because the fax is constantly checking for errors
during transmission, ECM sending and receiving
require more time. If the transmission speed
appears to be extremely slow, you may be able
to speed it up by turning ECM off. See p. 87.
❏ Cannot get faxes from information services?
Is your fax connected to a rotary dial telephone
line?
Press [Tone] to receive faxes from information
services that require touch-tone telephone lines
for transmission.
❏ Nothing shows on the display?
Is the power plug firmly plugged in?
Cannot solve the problem?
Still cannot solve the problem?
Check the plug and be sure it is firmly plugged
into the socket.
Disconnect the power. Wait five seconds and
reconnect the power again.
Check the other party’s fax and be sure that it is
compatible with your fax. There are some
compatibility problems between certain types of
faxes.
Call for service.