Filter
Top Products
29
PREPARING TO USE YOUR FAX
2
5
After selecting or entering a value, press
[Start/Copy].
6
Repeat steps 4 and 5 as needed.
7
When the operation is complete, press [Stop].
Registration ends and the fax returns to standby
mode.
Start/Copy
DATA ENTRY OK
Stop
Registering your name and number
After 60 seconds of no operation panel input, the fax returns to standby
mode and any unregistered changes are lost.
Entering a number ______________________________
Whenever you are prompted to enter a fax number or a telephone number, follow
these procedures.
Use the numeric buttons to enter the number.
TEL=
❚ You can enter up to 20 digits for your fax number or 50 digits for a speed dialling
number.
❚ Be sure to enter the appropriate area code if dialling outside the area served by your
local exchange.
❚ You cannot enter dashes, slashes, commas, or other punctuation.
Use the One-touch Speed Dialling buttons as follows:
❚ To enter a space between numbers, press [Space].
❚ If you make a mistake, press [Clear] and enter the number
again.
❚ To erase a previously registered number, press [Clear].
You can also enter a new number over the old one.
If you need to enter a pause for any reason,
❚ Press [Redial/Pause] at the desired point in the sequence when entering a series of
digits.
❚ A pause within a number is 2 seconds long*. The length of this pause can be
adjusted. See MID PAUSE SET in TX SETTINGS, p. 87. A pause at the end of a
number is fixed at 10 seconds.
*4 seconds long in the UK and Hong Kong.
01
Send Options
02
Report
03
Cleaning
R
04
05 06
Space
Tone
07
Clear
D.T.
08
09 10