Filter
Top Products
85
SETTINGS AND ACTIVITY REPORTS
7
TEL REGISTRATION
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name Description Settings
Settings
See Registering One-touch Speed Dialling numbers and
names, p. 36.
See Registering Coded Speed Dialling numbers and names,
p. 38.
1-TOUCH DIAL
CODED DIAL
–
–
Set the date using the numeric buttons.
Set the time (24-hour clock) using the numeric buttons.
Enter your fax number using the numeric buttons.
This is the name that appears at the top of each fax page
you send. See Entering a name, p. 30.
This option sets the parametres for the identification header
that appears on every page you send.
Enable/disable the TTI.
Select the position of the TTI.
OUTSIDE IMAGE: Position the TTI outside the image area.
INSIDE IMAGE: Position the TTI inside the image area.
Select the icon for the fax number.
FAX: Sets the fax icon.
TEL: Sets the telephone icon.
Set the density of the reproduction. Set to DARKER for light
originals and LIGHTER for dark originals.
Enable/disable the off hook alarm. The alarm alerts you that
the telephone is off hook.
Set the audio level of the line monitor, calling signal and alarm.
Set the volume of the line monitor (sound during off hook
and dialling conditions).
Set the volume of the ring produced when the fax detects a
voice call during FAX/TEL switchover.
Set the volume of the error alarm sound.
Set the volume of the keypad.
Set the ring tone.
Turn the dial tone on/off for dialling.
SET DATE
SET TIME
ENTER YOUR TEL
USER NAME
TTI OPTION SET
TX TERMINAL ID
TTI POSITION
TTI MARKER
DENSITY CONTROL
OFFHOOK ALARM
VOLUME CONTROL
PHONE VOL LEVEL
CALLING VOLUME
ALARM VOLUME
KEYPAD VOLUME
RX CALL LEVEL
DIALING TONE
–
–
–
–
ON/OFF
OUTSIDE IMAGE/
INSIDE IMAGE
FAX/TEL
STANDARD/DARKER/
LIGHTER
ON/OFF
–
VOL MIN/VOL MID/
VOL MAX
VOL MIN/VOL MID/
VOL MAX
VOL MIN/VOL MID/
VOL MAX
OFF/VOL MIN/
VOL MID/ VOL MAX
LOW/HIGH
ON/OFF
USER SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name Description Settings