Filter
Top Products
87
SETTINGS AND ACTIVITY REPORTS
7
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
ON/OFF
2 seconds (1 to 15)*
ON/OFF
2 times (1 to 10)**
2 minutes (2 to 60)***
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling
sequence.
Determine whether the fax will redial a number if it fails to
get a response on the first attempt.
Set the number of retries.
Set the period of time between rediallings.
TX SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name Description Settings
*4 seconds (4 to 11) in the UK and Hong Kong.
**Up to 2 times in Australia, 4 times in the UK and Ireland, and 5 times in New Zealand.
***Minimum interval is 1 minute in New Zealand.
Settings
RX SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name Description Settings
ECM RX
FAX/TEL SWITCH
RING START TIME
F/T RING TIME
F/T SW ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
NET. SWITCH
(Australia and New Zealand only)
Enable/disable error correction during reception.
Enable/disable FAX/TEL switchover. When ON, this feature
answers calls, and if no fax tone is detected, the fax rings to
alert you of an incoming call.
Set the duration that the fax listens for a fax tone before
starting to ring.
Set the length of time the fax will ring to alert you of an
incoming call.
Select the action taken after the F/T RING TIME expires.
When the fax is set to Fax Only Mode or Fax/Tel Mode and
an extension phone is connected, set the fax to ring when it
receives a call.
Set the number of incoming rings before the fax answers.
Determine if the fax switches to document receive mode
after the fax rings for a specified time when the fax is in the
manual receive mode.
Set the amount of time the fax will ring before switching to
document receive mode.
Allows you to dial the REMOTE RX ID on an extension phone
to start receiving a document.
If you set REMOTE RX ON, you can change the remote
receiving ID.
Turn on/off memory receiving of a document.
Enable/disable the network FAX/TEL switching feature.
ON/OFF
8 seconds (0 to 30)
22 seconds (10 to 300)
DISCONNECT/RECEIVE
ON/OFF
2 times (1 to 99)
ON/OFF
10 seconds (1 to 99)
ON/OFF
25 (00 to 99, including ✱
and #)
ON/OFF
ON/OFF