Filter
Top Products
20
Manual Mode __________________________________
You may want to set your fax to Manual Mode if you want to personally monitor
every call, whether from a fax machine or a person.
You need to have the optional handset or an extension phone connected to your fax
for this mode. See pp. 14 and 15.
■ Setting Manual Mode
Set to Manual Mode if you want to personally monitor every incoming call.
1
Press [Receive Mode] until “Manual Mode”
appears on the LCD.
2
Press [Start/Copy].
When this mode is set, the LCD will display the
time and “Manual”.
■ Receiving documents and calls in Manual Mode
You can set the fax to ring every time it receives a call so that you can personally
check if it is from a fax machine or from a person.
Keep in mind that you cannot use Manual Mode if a document is in the Automatic
Document Feeder (ADF) waiting to be sent.
Receive Mode
Manual Mode
1
Make sure you have connected the optional
handset or an extension phone to your fax.
See pp. 14 and 15.
2
Make sure the fax is set to “Manual Mode”
(see above).
3
When the fax rings, pick up the handset.
4
If you hear a person’s voice, start your conversa-
tion. If the caller wants to send a document after
talking to you, press [Start/Copy] on the fax to
receive the document.
or
If you hear a slow beep or silence, another fax is
trying to send you a document. Press [Start/Copy]
on the fax.
You can also start receiving the document by pressing
“25” on the extension phone, and then hanging up.
Your fax begins receiving the document.
Start/Copy
12:00 Manual
Start/Copy