Filter
Top Products
64
6
Press [Start/Copy].
7
Dial the other party’s fax number.
❚ You can enter the other party’s fax number using
the numeric buttons, One-touch Speed Dialling
(see p. 58), or Coded Speed Dialling (see p. 58).
❚ If you use the numeric buttons, press [Start/Copy]
after entering the number to register it before going
on to the next number.
8
Press [Start/Copy].
The fax reads the document into memory.
Start/Copy
TEL=
9
0
TEL= 34567890
Start/Copy
TX/RX NO. XXXX
MEMORY INPUT P01
After scanning in the document, the fax displays TIMER on the LCD. When the set
time comes, the fax dials and sends the document.
TIMER
Sending other documents while the fax is set
for Delayed Sending ____________________________
You can send, receive, and copy other documents even when the fax is set for
sending at a preset time.
The fax can only register one preset sending operation at a time.
To send or copy other documents after setting the fax for Delayed Sending, simply
send or copy using any other sending procedure in this manual.
Delayed Sequential Broadcasting
Delayed Sequential Broadcasting is applicable for sending one document
to more than one location at a later time when multiple fax numbers are
dialled. See p. 66.