Filter
Top Products
86
TEL LINE TYPE*
PSTN/PBX SET
PSTN
PBX
M-KEY SETTING
(UK only)
ACCESS CODE
ID CODE
Set the dialling method the fax uses to match the type of
phone line you have.
Sets the type of the PBX through which your fax is connected.
Your fax is connected to the outside line.
Your fax is connected through a PBX.
You can set the type of the PBX among PREFIX, HOOKING and
EARTH CONNECTION. If you select PREFIX, you can set the
number up to 19-digits that will access the outside line.
If set to PBX, the [05] button cannot be used for One-touch
Speed Dialling.
Enable/disable the M–key setting. When set to ON, the [10]
button cannot be used for One-touch Speed Dialling.
Set an access code and ID code for the UK Call, Global Call, or
Day Call Service of Cable and Wireless Communications
Limited, p. 42.
Set an access code up to 19 digits.
Set an ID code up to 19 digits.
TOUCH TONE/
ROTARY PULSE**
PSTN/PBX
ON/OFF
–
–
Name Description Settings
OUTPUT YES/
PRINT ERROR ONLY/
OUTPUT NO
OUTPUT YES/
OUTPUT NO
OUTPUT YES/
PRINT ERROR ONLY/
OUTPUT NO
OUTPUT YES/
OUTPUT NO
ON/OFF
ON/OFF
TX REPORT
TX CONFIRM REP.
RX REPORT
ACTIVITY REPORT
AUTO PRINT
TX/RX SEPARATE
INKSAVER
REPORT SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name Description Settings
Enable/disable automatic printing of the transmission report.
OUTPUT YES sets the fax to print an activity report every
time you send a document.
PRINT ERROR ONLY prints only when a transmission error
occurs.
OUTPUT NO turns off the activity report feature.
When you set TX REPORT to OUTPUT YES or PRINT ERROR
ONLY, you can add to the TX report half of the first page of
the document that was being sent. This can help remind you
which document was being sent. Valid only for memory
transmissions.
Enable/disable automatic printing of the reception report.
OUTPUT YES sets the fax to print an activity report every
time you receive a document.
PRINT ERROR ONLY prints only when an error occurs during
receiving.
OUTPUT NO turns off the activity report feature.
Enable/disable automatic printing of the activity report.
When you set OUTPUT YES, your fax is set to print an
activity management report for every 20 transactions
(sending and receiving).
Divide the activity management report into sending and
receiving transactions.
Enable/disable economy printing (ink saving feature) when
printing reports.
*TEL LINE TYPE cannot be set in Norway and Denmark.
**TOUCH TONE is the factory setting in the UK, Australia, New Zealand and Singapore.