Filter
Top Products
59Troubleshooting
LCD Cannot Be Seen At All or Is Hard to See
An Unintended Language Is Displayed on the LCD
Cause Action
The display on the LCD is hard to see. If the contrast of the LCD is too strong or too weak, adjust it in the Adjust
contrast menu in the Maintenance/settings. Refer to “Changing the Machine
Settings” in the User’s Guide on-screen manual.
Cannot see the display on the LCD.
z If the POWER lamps is off
The machine is not powered on. Connect the power cord and press the ON/
OFF button. The machine will power on and the LCD will display a message.
z If the POWER lamps is lit
The LCD may be in the screen-saver mode. On the Operation Panel, press a
button other than the ON/OFF button.
Cause Action
The language you want to be displayed
is not selected.
Select the language you want to be displayed according to the following
procedure.
(1)Press the COPY button, wait for 5 seconds, and then press the MENU
button.
(2)Press the ] button once, then press the OK button.
(3)Press the ] button once, then press the OK button.
(4)Press the } button three times, then press the OK button.
If the Bluetooth Unit is connected, press the } button four times, then press
the OK button.
(5)Use the { or } button to select the language you want to be displayed, then
press the OK button.