Filter
Top Products
E-28
LONG
This setting causes the tape to feed 21mm at the beginning and end of
each printing.
About 21mm About 21mm
MEDIUM
This setting causes the tape to feed 10mm at the beginning and end of
each printing.
LEADING MARGIN
AUTO TAPE CUT (Page E-30)
leader
About 23 mm About 10 mm About 10 mm
• Leading margin auto tape cut is not performed when TAPE LENGTH:
About 31 mm or less is set for OVERALL FORMAT (See page E-27).
SHORT
This setting causes the tape to feed 3mm at the beginning and end of each
printing.
LEADING MARGIN
AUTO TAPE CUT (Page E-30)
leader
About 23 mm About 3 mm About 3 mm
• Leading margin auto tape cut is not performed when TAPE LENGTH:
About 24 mm or less is set for OVERALL FORMAT (See page E-27).
MANUAL
This setting doesn’t provide any side spaces of the printed text. If you per-
form two consecutive print operations (without manually feeding between
prints), the last character of the first print operation is followed by the first
character of the second print operation, with no space provided between
them. It is a good way to save tape when you print a series of tapes.
Important! After you finish printing with manual feed, be sure to always press
FUNCTION and then IMAGE (CUT). This feeds the tape and then cuts it. See
“Manual Tape Cut” on page E-31 for details.
T-LENGTH (TAPE LENGTH)
Select “FIXED” if you want to specify a fixed tape length. Use i to highlight
[ ] below “FIXED”. Use t or y to specify the tape length in the range of 0.0 cm
to 99.9 cm (0~39.3 inch). Specify “AUTO” for this option if you want the label
printer to automatically adjust the length of the tape.
B-ALIGN (BLOCK ALIGN)
LEFT
EQUAL
CENTER
RIGHT