Filter
Top Products
E-7
Label Printer Menus
Label printer operation is designed to be as simple as possible, thanks to on-
screen menus that you can use to select the settings you need. Each menu is
described in detail in the sections that follow in this manual, but note the follow-
ing general points when using them.
• The item that is highlighted in a menu is the
one that is currently selected.
• Use u and i to move the highlighting up and down and change the se-
lected item.
• Press SET to execute the highlighted item, or ESC to exit the displayed menu
(and return to the previous menu or screen) without selecting anything.
• When you press SET to execute a menu item, the label printer either moves
on to the next menu, or it executes the selected function and returns to the
text input screen that you started from.
Part 2 Getting Ready
This part of the manual tells you how to load the tape cartridge, and perform
other basic setups for the label printer.
Important! Be sure to read this section before attempting to use the label
printer.
AC power cord
Note the following important precautions about the AC power cord.
• Use only the power cord that comes with the label printer. Using a wrong
power cord can damage your label printer.
• Be sure to turn the label printer off before you connect the power cord. Do not
turn power on until the power cord is connected to the label printer and plugged
into and AC outlet.
To connect the AC power cord
Connect the power cord to the label printer as
illustrated nearby. Plug the other end into a stan-
dard household AC outlet.
After you finish using the label printer, turn it off
and disconnect the AC power cord.
• Be sure to grasp the plug of the AC power cord when disconnecting it.
Never pull on the cord.
Currently selected item