Filter
Top Products
16
Note The chassis is usually installed in the bottom of the rack.
Step 5 Maneuver the chassis into position in the rack.
Step 6 Align the mounting bracket holes with the rack post holes and attach the chassis to the rack with the appropriate-sized
screws (performed by the third person, unless the chassis is resting on the bottom of the rack or a shelf).
Note Figure 11 shows the chassis flush-mounted at the rear. The procedure is identical for the other mounting methods.
Figure 11 Installing the Chassis in a Rack
Connecting the Chassis to Ground
Connecting the Cisco uBR10012 router chassis to earth ground is required for all AC or DC-powered installations. Have the
recommended tools and supplies available before you begin this procedure.
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if
you are uncertain that suitable grounding is available.
Statement 1024
.
Caution The importance of proper grounding cannot be overemphasized. It will minimize the potential for damage to your
system and maximize safety at the system site. We recommend that you consult a licensed electrician or your local
electric utility company if you have any questions.
95543
Rear
mounting
brackets
Mounting
brackets