Filter
Top Products
Chapter 1 Unpacking and Installing the CSS
Unpacking the CSS
1-4
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Unpacking the CSS 11050 or CSS 11150
To unpack the CSS 11050 or CSS 11150:
1. Remove the CSS and all accessories from the shipping carton.
2. Check the configuration of the CSS and the accessories against the items
listed on the packing slip. Report any discrepancies as described in “If the
Product is Damaged” in this chapter.
3. To install the CSS 11050 or CSS 11150, go to the “Installing the CSS 11050
or CSS 11150” section.
Unpacking the CSS 11800
The CSS 11800 is shipped attached to a wooden pallet with screws and shipping
brackets. Due to the large size and weight of a unit, move it to the installation site
before unpacking it from the shipping carton.
To unpack the CSS 11800:
1. Remove all enclosed packing materials. Save the packing materials in case
you need to repack the CSS later.
2. Remove the accessories from the shipping carton.
3. Check the configuration of the CSS and the accessories against the packing
slip. Report any discrepancies as described in the “If the Product is Damaged”
section later in this chapter.
4. Using a Phillips screwdriver, remove the screws from the shipping brackets
on the pallet. Figure 1-1 shows the CSS 11800 attached to the wooden pallet.
5. Carefully remove the CSS from the pallet.