Cisco Systems 11000 Series Network Hardware User Manual


 
Chapter 2 Cabling the CSS
Cabling the CSS 11800 Modules
2-24
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
SFM and SFM2 LEDs
The SFM and SFM2 front panel LEDs indicate operating and configuration status.
Table 2-8 describes the SFM LEDs.
Internal Disk Module LEDs
The Internal Disk Module (IDM) in slot 15 contains Power, Status, and Active
LEDs. Figure 2-16 illustrates the IDM front panel LEDs. The LEDs apply to both
the flash-based (model CSS8-IDM-MEM-FD) or hard drive-based (model
CSS8-IDM-MEM-HD) IDM.
Table 2-8 Switch Fabric Module LED Descriptions
LED Name Color LED Status Indicates
Power Green Off Module does not have power
On Module has power
Status Yellow Off Module is operational
On Module is experiencing an error (only
when the SFM is active; the LED is
normally yellow when the SFM is
passive)
Active Green Off SFM is passive
On SFM is active