Cisco Systems 11000 Series Network Hardware User Manual


 
Chapter 2 Cabling the CSS
Cabling the CSS 11800 Modules
2-14
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Switch Control Module LEDs
The SCM front panel LEDs indicate module and configuration status. Table 2-4
describes the SCM LEDs and their indications.
Table 2-4 Switch Control Module LED Descriptions
LED Name Color LED Status Indicates
Power Green Off Module does not have power
On Module has power
Status Yellow Off Module is operational
On Module is experiencing an error
(only when the SCM is active; the
LED is normally yellow when the
SCM is passive)
Active Green Off SCM is passive
On SCM is active
Duplex
(Ethernet
Management Port)
Green Off Port is operating at half duplex
On Port is operating at full duplex
10/100
(Ethernet
Management Port)
Green Off Port is operating at 10 Mbps
On Port is operating at 100 Mbps
Link
(Ethernet
Management Port)
Green Off No link
On Link established
Blinking Link established and constant
activity
PS 1
(Power Supply 1)
Green Off Power supply is not functioning
On Power supply is functioning
PS 2
(Power Supply 2)
Green Off Power supply is not functioning
On Power supply is functioning