Filter
Top Products
Chapter 1 Unpacking and Installing the CSS
Installing the CSS 11050 or CSS 11150
1-8
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Figure 1-2 Front-Mounting the Brackets on the CSS 11050 or CSS 11150
Figure 1-3 Mid-Mounting the Brackets on the CSS 11050 and CSS 11150
3. Secure the bracket to the CSS with four screws.
4. Repeat steps 2 and 3 to install a mounting bracket on the other side of the
CSS.
You are ready to install the CSS in the cabinet.
Installing the CSS into the Rack
Before you begin, you will need a #2 Phillips screwdriver and four pan-head
screws. To install the CSS 11050 or CSS 11150 into an equipment rack:
1. Raise the CSS to the installation height. Align the screw holes on the
mounting bracket with the holes on the equipment rack.
49567
Mounting
bracket
Mounting
bracket
49568
Mounting
bracket
Mounting
bracket