Cisco Systems 11000 Series Network Hardware User Manual


 
Chapter 2 Cabling the CSS
Cabling the CSS 11050 and CSS 11150
2-6
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
CSS 11150 Front Panel Connectors and LEDs
All front panels of the CSS 11150 models front panels contain connectors and
LEDs that vary according to their model number. For example, the CSS 11151
front panel in Figure 2-5 has:
One RS-232 Console connector (9600 baud)
One RS-232 Diag connector, reserved for field service use only
(115,200 baud)
12 auto-sensing 10/100-Mbps Fast Ethernet connectors and associated
Link/Activity status, 10/100 (Mbps), and Duplex (Half or Full) LEDs
Power, Status, and Ready LEDs
Figure 2-5 CSS 11151 Front Panel Connectors and LEDs
The CSS 11152 (shown in Figure 2-6) has four additional Fast Ethernet TX
connectors and their associated Link/Activity status, 10/100 (Mbps), and Duplex
(Half or Full) LEDs.
Figure 2-6 CSS 11152 Front Panel Connectors and LEDs
Power
Status
Ready
1 2 3 4 5 6 7 8 9101112
2X 4X 6X 8X 10X 12X
1X 3X 5X 7X 9X 11X
100BASE-TX
Console
Link/Act
Duplex
10/100
RS-232
Diag
49578
Power
Status
Ready
1 2 3 4 5 6 7 8 9101112
13141516
2X 4X 6X 8X 10X 12X
13X 14X 15X 16X
1X 3X 5X 7X 9X 11X
100BASE-TX
Console
Link/Act
Duplex
10/100
Link/Act
Duplex
10/100
RS-232
Diag
49579
1000BASE-TX
Additional Fast Ethernet TX connectors and LEDs