Filter
Top Products
Chapter 1 Unpacking and Installing the CSS
Installing a CSS 11800 Module
1-14
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Installing a CSS 11800 Module
This section applies to the CSS 11800 modules only and contains the following
sections:
• Installation Precautions and Restrictions
• Unpacking a CSS 11800 Module
• Installing a Module
• Installing a Passive SCM or SFM
Installation Precautions and Restrictions
This section includes background material related to installing a module into the
CSS 11800 chassis. It is recommended that you read the topics in this section
before installing a module.
Installation Precautions
Read and observe the following precautionary information prior to servicing the
CSS 11800.
Warning
Do not remove or install modules without using appropriate anti-static guard
measures. The CSS includes an anti-static wrist strap in the accessory kit.
Attach the copper tape end of the strap to an unpainted metal surface on the
chassis. You can leave the strap connected to the chassis when you are done.
Warning
If you do not power down the CSS 11800, an electrical energy hazard is present
within the chassis. Prior to installing or removing components, remove all
metallic objects from hands and wrists to prevent bridging of live contact
points.