Filter
Top Products
Chapter 2 Cabling the CSS
Cabling the CSS 11800 Modules
2-22
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Figure 2-14 illustrates the SFM front panel LEDs and connectors.
Figure 2-14 Switch Fabric Module Connectors and LEDs
The SFM2 contains two RJ-45 RS-232 Diag1 and Diag 2 connectors, combining
both Console and Diag functions on each connector (all of these connectors are
reserved for field service diagnostic use only).
49587
Power LED
Status LED
Active LED
Debug console
and diag console
Module ejector
Module ejector