Filter
Top Products
1-10
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
OL-4072-04
Chapter 1 Overview
Bridge Specifications
Maximum Power Levels
Each regulatory region limits the equivalent isotropic radiated power (EIRP) that can be supported
within their region. This restricts the bridge output power that can be used with the bridge antennas and
affects the resulting operating range of the bridge (for additional information refer to Appendix C,
“Channels and Maximum Power Levels.”
Safety Bridge:
UL 60950
CSA C22.2 No. 60950
IEC 60950
EN 60950
Power injector and power module:
UL 60950
CSA C22.2 No. 60950
IEC 60950
EN 60950
Note The power injector and the power
module must be used in an indoor
environment.
Electromagnetic
Compatibility (EMC)
Bridge:
FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 Class B
EN 55024
EN 301.489-1
EN 301.489-4
Power injector and power module:
FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 Class B
EN 55024
Radio Type Approvals Bridge radio:
FCC Part 15.207, 15.407, and15.209 Class B
ICES-003 Class B (Canada)
Canada DGTP-010
FCC Bulletin OET-65C
Industry Canada RSS-102, RSP100, and
RSS 210 Issue 5
Note No harmonized standard exists for this
frequency in the European Union regulatory
region. The radio spectrum matters are
covered in a Technical Construction File per
R&TTE Directive 99/5/EC.
—
RF Exposure Bridge antenna:
AIR-ANT58G28SDA-NAironet
AIR-ANT58G10SSA-NAironet
AIR-ANT58G9VOA-NAironet
Note For Ireland the bridge satisfies EN50835 for
RF exposure.
—
Table 1-1 Bridge, Power Injector, and Power Module Specifications (continued)
Category Bridge Power Injector and Power Module