Filter
Top Products
Contents
v
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
OL-4072-04
Assigning Basic Settings 5-4
Default Settings on the Express Setup Page 5-8
What To Do Next 5-8
Output Power Level 5-8
Protecting Your Wireless LAN 5-9
Using the IP Setup Utility 5-9
Obtaining and Installing IPSU 5-9
Using IPSU to Find the Bridge’s IP Address 5-10
Using IPSU to Set the Bridge’s IP Address and SSID 5-11
Assigning an IP Address Using the CLI 5-12
Using a Telnet Session to Access the CLI 5-12
CHAPTER
6 Troubleshooting 6-1
Checking the Bridge LEDs 6-2
Bridge Normal Mode LED Indications 6-2
Power Injector LEDs 6-4
Checking Power 6-6
Checking Basic Configuration Settings 6-7
SSID 6-7
Security Settings 6-7
Antenna Alignment 6-8
Resetting to the Default Configuration 6-8
Using the MODE Button 6-8
Using the Web Browser Interface 6-9
Reloading the Bridge Image 6-9
Using the MODE button 6-9
Web Browser Interface 6-10
Browser HTTP Interface 6-10
Browser TFTP Interface 6-11
Obtaining the Bridge Image File 6-11
Obtaining the TFTP Server Software 6-12
APPENDIX
A Translated Safety Warnings A-1
Warning Definition A-2
Installation Warning A-3
Installation and Grounding Warning A-4
Circuit Breaker Warning A-6
Ground Conductor Warning A-7