Filter
Top Products
4-4
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
OL-4072-04
Chapter 4 Stacking Bridges
Verifying Isolation
d. Slowly rotate the antenna of bridge D a few degrees to the left and to the right and verify that the
RSSI level does not rapidly spike above 1.95 V. If the voltage peaks above 1.95 V, move the bridge
farther away and repeat this step.
Step 5 After you verify the isolation of the second bridge link, you must properly set the root and non-root
bridge settings for both links, align the link 2 bridge antennas, and verify proper link 2 operation.