Filter
Top Products
D-2
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
OL-4072-04
Appendix D Assembling the Rooftop or Wall Mount
Overview
Overview
Use the optional rooftop or wall mount to mount your bridge to a flat horizontal or vertical surface, such
as a building wall or roof. You must assemble the mount before you can use it.
Unpacking the Mount
Follow these steps to unpack the mount:
Step 1 Open the shipping container and carefully remove the contents.
Step 2 Return all packing materials to the shipping container and save it.
Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. If any item
is damaged or missing, notify your authorized Cisco sales representative.
Package Contents
Your mount package contains the following items:
• Mast pipe
• Mounting plate
• Mounting hardware consisting of the following:
–
One long flanged hex bolt [2 in. (5.08 cm)]
–
Two carriage bolts [0.5 in. (1.27 cm)]
–
Four washers
–
Three flanged hex nuts