Filter
Top Products
3-12
Installing and Configuring Cisco Access Registrar, 4.2
OL-17221-02
Chapter 3 Upgrading Cisco Access Registrar Software
Upgrading Cisco Access Registrar Solaris Software
###############################################################
#
# A backup copy of your original configuration has been
# saved to the file:
#
# /opt/CSCOar/temp/10062.origconfig-backup
#
# If you need to restore the original configuration,
# enter the following command:
#
# mcdadmin -coi /opt/CSCOar/temp/10062.origconfig-backup
#
###############################################################
Removing Old VSA Names
The upgrade process provides an analysis of the configuration database, addition of new database
elements, and a search for obsolete VSA names. When this is complete, a message like the following is
displayed:
##############################################################
#
# Sometimes VSAs get renamed from version to version of AR.
# The upgrade process does not automatically remove the
# old names. The upgrade process has generated a script
# to remove the old names. The script is located in:
#
# /opt/CSCOar/temp/10062.manual-deletes
#
# Review the script to make sure you are not using any of
# these old VSAs. Modify your configuration and your
# scripts to use the new names before you attempt to run
# the script.
#
# To run the removal script, type:
#
# aregcmd -sf /opt/CSCOar/temp/10062.manual-deletes
#
##############################################################
At this point, you should examine the script produced by the upgrade process to make sure that your site
is not using any of the old VSAs. In the example above, the script can be found at
/opt/CSCOar/temp/10062.manual-deletes.
Note The number preceding manual.deletes is produced from the PID of the upgrade process.
Modify your configuration and your scripts to use the new names before you attempt to run the script
generated by the upgrade process.
VSA Update Script
The upgrade process builds a script you can use to update VSAs in your system.
##############################################################
#
# VSAs for the old AR version are not updated
# automatically. The upgrade process generated a script