Filter
Top Products
4-3
Installing and Configuring Cisco Access Registrar, 4.2
OL-17221-02
Chapter 4 Configuring Cisco Access Registrar 4.2
Configuring a Basic Site
Step 1 Run the aregcmd command:
aregcmd
Step 2 When asked for “Cluster,” press Enter.
Step 3 Enter your administrator name and password.
When you install CAR software, the installation process creates a default administrator called admin
with the password aicuser.
Changing the Administrator’s Password
The administrator ID admin and password aicuser are default settings for all releases of CAR software.
For security purposes, you should change the password for admin at your earliest convenience. To
change the administrator’s password, complete the following steps:
Step 1 Use the cd command to change to the Administrators level. Cisco AR displays the contents of the
Administrators object.
cd //localhost/Administrators
Step 2 Use the cd command to change to admin:
cd admin
[ //localhost/Administrators ]
Entries 1 to 1 from 1 total entries
Current filter: <all>
admin/
Step 3 Use the set command to change the administrator’s password. You enter the password on the command
line in readable form, however, Cisco AR displays it as encrypted.
The following example changes the password to 345. You are asked to reenter it for confirmation.
set Password 345
Optionally, use the set command to change the description of the admin administrator.
set Description local
Step 4 Use the ls command to display the changed admin.
ls