Filter
Top Products
5-5
Installing and Configuring Cisco Access Registrar, 4.2
OL-17221-02
Chapter 5 Customizing Your Configuration
Configuring Multiple UserLists
Configuring Separate UserLists
Divide your site along organizational or company lines, and create a UserList for each unit.
Creating Separate UserLists
Step 1 Run the aregcmd command.
aregcmd
Step 2 Use the cd command to change to UserLists.
cd /Radius/UserLists
Step 3 Use the add command to create a UserList, specifying the name and optional description. The following
example specifies the name
North and the description Users from the northern office.
add North "Users from the northern office"
Step 4 Repeat for the other UserLists you want to add.
Configuring Users
After you have created multiple UserLists, you must populate them with the appropriate users.
Populating UserLists
Step 1 Use the cd command to change to the UserList you have created.
cd /Radius/UserLists/North
Step 2 Use the add command to add a user. Using the sample users as models, configure the appropriate group
membership. The following example adds user
beth, with the optional description telemarketing, the
password
123, Enabled set to TRUE, and group membership to PPP-users.
Ta b l e 5-3 Configuring Separate UserLists
Object Action
UserLists Add new UserLists.
Users Add users.
Services Add new Services.
Set service type (local).
Radius Set Incoming Script.
Scripts Add a new Script.