Cisco Systems 4.2 Network Card User Manual


 
4-9
Installing and Configuring Cisco Access Registrar, 4.2
OL-17221-02
Chapter 4 Configuring Cisco Access Registrar 4.2
Configuring a Basic Site
PPP-users—uses the BaseProfile default-PPP-users to specify the attributes of PPP service to
provide the user. The BaseProfile default-PPP-users contains the attributes that are added to the
response dictionary as part of the authorization. For more information about Profiles, see the
“Configuring Profiles” section on page 4-10.
Telnet-users—uses the BaseProfile default-Telnet-users to specify the attributes of Telnet service
to provide the user. The BaseProfile default-Telnet-users contains the attributes that are added to
the response dictionary as part of the authorization.
For this basic site, you do not need to change these UserGroups. You can, however, use the add or delete
commands to add or delete groups.
Configuring Clients
The Clients object contains all NAS and proxies that communicate directly with Cisco AR. Each client
must have an entry in the Clients list, because each NAS and proxy share a secret with the RADIUS
server, which is used to encrypt passwords and to sign responses.
Note If you are just testing Cisco AR with the radclient command, the only client you need is
localhost. The localhost client is available in the sample configuration. For more
information about using the radclient command, see the
“Using radclient” section on
page 4-12.
Adding a NAS
You must configure your specific NAS from both ends of the connection. That is, you must configure
Cisco AR for your NAS, and you must configure your NAS for Cisco AR.
Step 1 Use the cd command to change to the Clients level:
cd /Radius/Clients
Step 2 Use the add command to add the NAS: QuickExampleNAS:
add QuickExampleNAS
Step 3 Use the cd command to change directory to the QuickExampleNAS directory:
cd /Radius/Clients/QuickExampleNAS
Step 4 Use the set command to specify the description WestOffice, the IP address 196.168.1.92, the shared
secret of
xyz, the Type as NAS.
set Description WestOffice
set IPAddress 209.165.200.225
set SharedSecret xyz
set Type NAS
set Vendor USR