Filter
Top Products
5-13
Installing and Configuring Cisco Access Registrar, 4.2
OL-17221-02
Chapter 5 Customizing Your Configuration
Configuring a Remote Server for AA
Figure 5-2 Using a Script to Choose a Remote Server
Table 5-5 provides an overview of the process. The following sections describe the process in more
detail. Repeat for each RemoteServer you want to configure.
Configuring Two Remote Servers
Configure each remote server you want to use for authentication and authorization. The following
example shows the
North remote server.
Creating RemoteServers
Step 1 Run the aregcmd command:
aregcmd
Step 2 Use the cd command to change to the RemoteServers level:
cd /Radius/RemoteServers
Step 3 Use the add command to add the remote server you specified in the Services level. The following
example adds the
North remote server:
add North
Request
Choose
service
Scripts
Services
NorthUsers-radius
SouthUsers-radius
Remote
Servers
North
South
North2
18999
Ta b l e 5-5 Configuring Multiple Remote Servers
Object Action
RemoteServers Add a new RemoteServer.
Set the protocol (radius).
Set the shared secret.
Services Add a new Service.
Set the type (radius).
Set the remote server name and number.
Scripts Add a new Script.
Radius Set the IncomingScript.