Cisco Systems ASA 5585-X Webcam User Manual


 
11-27
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 11 Configuring Inspection of Basic Internet Protocols
HTTP Inspection
The Select HTTP Map dialog box lets you select or create a new HTTP map. An HTTP map lets you
change the configuration values used for HTTP application inspection. The Select HTTP Map table
provides a list of previously configured maps that you can select for application inspection.
Fields
Use the default HTTP inspection map—Specifies to use the default HTTP map.
Select an HTTP map for fine control over inspectionLets you select a defined application
inspection map or add a new one.
Add—Opens the Add Policy Map dialog box for the inspection.
HTTP Class Map
The HTTP Class Map dialog box is accessible as follows:
Configuration > Global Objects > Class Maps > HTTP
The HTTP Class Map pane lets you configure HTTP class maps for HTTP inspection.
An inspection class map matches application traffic with criteria specific to the application. You then
identify the class map in the inspect map and enable actions. The difference between creating a class
map and defining the traffic match directly in the inspect map is that you can create more complex match
criteria and you can reuse class maps. The applications that support inspection class maps are DNS, FTP,
H.323, HTTP, IM, and SIP.
Fields
Name—Shows the HTTP class map name.
Match Conditions—Shows the type, match criterion, and value in the class map.
Match Type—Shows the match type, which can be a positive or negative match.
Criterion—Shows the criterion of the HTTP class map.
Value—Shows the value to match in the HTTP class map.
Description—Shows the description of the class map.
Add—Adds an HTTP class map.
Edit—Edits an HTTP class map.
Delete—Deletes an HTTP class map.
Add/Edit HTTP Traffic Class Map
The Add/Edit HTTP Traffic Class Map dialog box is accessible as follows:
Configuration > Global Objects > Class Maps > HTTP > Add/Edit HTTP Traffic Class Map
The Add/Edit HTTP Traffic Class Map dialog box lets you define a HTTP class map.
Fields
Name—Enter the name of the HTTP class map, up to 40 characters in length.
Description—Enter the description of the HTTP class map.
Add—Adds an HTTP class map.