Cisco Systems ASA 5585-X Webcam User Manual


 
32-6
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 32 Configuring the ASA CSC Module
Guidelines and Limitations
Domain name and hostname for the CSC SSM.
An e-mail address and an SMTP server IP address and port number for e-mail notifications.
E-mail address(es) for product license renewal notifications.
IP addresses of hosts or networks that are allowed to manage the CSC SSM. The IP addresses
for the CSC SSM management port and the ASA management interface can be in different
subnets.
Password for the CSC SSM.
Guidelines and Limitations
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
Supported in single and multiple context modes.
Firewall Mode Guidelines
Supported in routed and transparent firewall modes.
Failover Guidelines
Does not support sessions in Stateful Failover. The CSC SSM does not maintain connection information,
and therefore cannot provide the failover unit with the required information. The connections that a CSC
SSM is scanning are dropped when the ASA in which the CSC SSM is installed fails. When the standby
ASA becomes active, it forwards the scanned traffic to the CSC SSM and the connections are reset.
IPv6 Guidelines
Does not support IPv6.
Model Guidelines
Supported on the ASA 5510, ASA 5520, and ASA 5540 only. Not supported on the ASA 5580 and the
ASA 5585-X.
Additional Guidelines
You cannot change the software type installed on the module; if you purchase a CSC module, you cannot
later install IPS software on it.
Default Settings
Table 32-1 lists the default settings for the CSC SSM.
Table 32-1 Default CSC SSM Parameters
Parameter Default
FTP inspection on the ASA Enabled
All features included in the license(s) that you
have purchased
Enabled