Filter
Top Products
CHAPTER
3-1
Cisco Broadband Access Center for Cable Installation Guide 2.7
OL-19105-01
3
Installing Components
This chapter explains the procedures you must follow to correctly install Broadband Access Center for
Cable (BACC) components in a Solaris operating system environment.
This chapter contains these topics:
• Installing Components Using the Graphical User Interface, page 3-1
• Installing Components Using the CLI, page 3-8
Installing Components Using the Graphical User Interface
This section explains the procedures that you follow to install one or more of components of BACC using
the GUI.
You can choose to install one or all of these components:
• Regional distribution unit (RDU). Refer to Installing the Regional Distribution Unit, page 3-2 for
further information.
• Network Registrar extensions. Refer to Installing Extensions on a Network Registrar Server,
page 3-3 for further information.
• Key Distribution Center (KDC). Refer to Installing the Key Distribution Center, page 3-7 for further
information.
• Device Provisioning Engine (DPE). Refer to Installing the Device Provisioning Engine, page 3-8 for
further information.
For more information about each component see the “Broadband Access Center for Cable Components”
section on page 2-1.
Before you begin any of these procedures, you must complete the initial installation procedure described
in the
“Installation and Startup Process” section on page 2-2.