Cisco Systems Broadband Access Center Network Router User Manual


 
viii
Cisco Broadband Access Center for Cable Installation Guide 2.7
OL-19105-01
Preface
Document Conventions
This guide uses the following conventions:
Boldface is used for commands, keywords, and buttons.
Italic is used for command input for which you supply values.
Screen font is used for examples of information that are displayed on the screen.
Boldface screen font is used for examples of information that you enter.
UNIX paths are indicated as follows: /tools/list/connections.
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the
publication.
Caution Means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
Section Title Description
Chapter 1 Overview Provides general requirements for a successful installation of
BACC.
Chapter 2 Preparing to Install
Components
Describes considerations you need to take into account as you
prepare to install BACC. For example, it describes the
individual components of BACC, the order of operations for
installing the software, and the BACC database requirements. It
also describes initial steps for installing the software using
either a graphical user interface or a command line interface.
Chapter 3 Installing
Components
Describes how to install the individual components of BACC
using either the graphical user interface or the CLI.
Chapter 4 Installing in a Lab
Environment
Describes how to install a lab version of BACC using either the
graphical user interface or the CLI.
Chapter 5 Post-Installation
Activities
Describes those activities that are performed following
installation.
Chapter 6 Upgrading
Broadband Access
Center for Cable
Describes the upgrade procedures performed on various BACC
components.
Chapter 7 Setting Up a Device
Provisioning Engine
Describes how to configure a device provisioning engine
(DPE).
Appendix A Network Registrar
Configuration File
Example
Shows examples of files used to configure Network Registrar
for high-speed data (HSD) and voice technology deployments.