Filter
Top Products
A-1
Cisco Broadband Access Center for Cable Installation Guide 2.7
OL-19105-01
APPENDIX
A
Network Registrar Configuration File Example
This appendix describes the sample configuration files included with this installation. This file is typical
of the files you use during the BAC installation.
Configuration Scripts
This section describes sample configuration scripts that you can copy and use to work with your BAC
implementation. One exists for DOCSIS modems and computers, while another is available for DOCSIS
modems and PacketCable MTAs.
Sample Script for DOCSIS Modems and Computers
This sample configuration nrcmd script (bpr_cnr_hsd_sample_config.nrcmd) is used for a high-speed
data deployment of DOCSIS modems and computers, in a multiple host configuration with failover
protection. It is installed in this directory: <BACC_HOME>/cnr_ep/samples/.
These assumptions have been made to create this script:
• DHCP primary server IP address is: 192.168.0.32
• DNS primary server IP address is: 192.168.0.32
This sample script defines these objects:
• Scope selection tag objects for provisioned client-classes.
• Client-class objects for provisioned DOCSIS modems and computers.
• Policy objects for unprovisioned and provisioned devices. The only difference is that DNS servers
are not given to unprovisioned devices.
• Scope and scope policy objects for unprovisioned and provisioned DOCSIS modems and computers.
• Disable the TFTP server.
To run this script, in the Network Registrar nrcmd program, enter:
<NR_HOME>/usrbin/nrcmd -N <username> -P <password> -b < bpr_cnr_hsd_sample_config.nrcmd
Where:
• -N—identifies the username
• -P—identifies the password