Filter
Top Products
3-10
Cisco Broadband Access Center for Cable Installation Guide 2.7
OL-19105-01
Chapter 3 Installing Components
Installing Components Using the CLI
Step 8 Press y and Enter to continue. The program prompts you to enter the database transaction logs
destination.
Step 9 To accept the default directory, /var/CSCObpr, press Enter; or enter another directory. For example:
Database Transaction Logs Destination
Logs Directory Destination
Logs Directory Destination [/var/CSCObpr] /var/disk1/CSCObpr
The program then asks you to confirm the directory.
Note By default, the installation program installs the database transaction logs directory
(BPR_DBLOG) in the same directory as the data directory (BPR_DATA). Cisco Systems
recommends that you locate the database transaction logs directory on the fastest disk on the
system and that you ensure that the disk has 1 GB of space available.
The directory specified becomes the top-level directory under which the installation program
creates a number of subdirectories.
Step 10 Press y and Enter to continue. The program prompts you to enter the listening port for the RDU.
Step 11 To accept the default value, 49187, press Enter; or enter another port number. For example:
Regional Distribution Unit Host/Port
Enter the IP address and the listening port of the regional distribution
unit(RDU)associated with this installation.
Enter the Host/IP address and address of the listening port for the RDU and RDU Listening
Port [49187]
Note The installation program obtains the IP address of the RDU automatically. You do not need to
enter this value.
The program then prompts you to confirm the listening port number.
Note The RDU listens on all interfaces. The listening port is the port number that the RDU uses to
communicate with other BACC components, such as DPEs and Network Registrar extension
points.
Step 12 Press y and Enter to continue. The program prompts you to enter the shared secret password.
Note You must use the same shared secret password for all RDUs, DPEs, and Network Registrar
extension points in your network. The default password is secret.
Step 13 Enter the password that you want to use for authentication among BACC servers. For example:
Shared Secret Password
Enter the password to be used for authentication
among the BPR servers.