Filter
Top Products
5-4
Cisco Broadband Access Center for Cable Installation Guide 2.7
OL-19105-01
Chapter 5 Post-Installation Activities
Uninstalling Broadband Access Center
Step 1 Log in as root.
Step 2 Manually remove the configuration of the BACC extensions on the Network Registrar server. You can
do this from any server that has nrcmd installed and connectivity with Network Registrar. Follow these
steps:
a. To uninstall the BACC extensions from your Network Registrar configuration, use these commands:
<NR_HOME>/usrbin/nrcmd -N admin -P changeme -b <
<BACC_HOME>/cnr_ep/bin/bpr_cnr_disable_extpts.nrcmd
b. To reload your DHCP server, use these commands:
/etc/init.d/nwreglocal stop
/etc/init.d/nwreglocal start
Alternatively, enter this command:
<NR_HOME>/usrbin/nrcmd -N admin -P changeme "dhcp reload"
c. To remove the BACC extensions from the Network Registrar extensions directory, use this
command:
rm -f <NR_HOME>/extensions/dhcp/dex/libbprextensions.so
Step 3 At the CLI prompt, enter:
<BACC_HOME>/_uninst/uninstall.bin -console
The following is displayed:
Welcome to the Uninstallation Program
Press Enter to uninstall Cisco Broadband Provisioning Registrar from your system.
Press Enter to Continue or 'q' to Quit:
Step 4 Press Enter to start the removal process. When uninstallation is complete these messages appear:
Cisco Broadband Provisioning Registrar was Uninstalled
Cisco Broadband Provisioning Registrar files were uninstalled successfully.
Press Enter to finish:
Step 5 Press Enter to exit the program.