Filter
Top Products
6-14
Cisco Provisioning Center User’s Guide
78-11339-01
Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module
Working with Service Element Profiles
Step 4 Save and apply the profile object by clicking the Save and Apply buttons on the toolbar.
Modifying a Service Element Profile
To modify a Service element profile, complete the following steps:
Step 1 From the Root Tree Viewer choose Equipment Module > Cisco NI1 DSLAM Equipment Module >
Cisco NI1 DSLAM ATM-ATM Cross Connect Profile > Service Element Profile.
Step 2 Click the Object Viewer button on the toolbar.
Step 3 Modify the values under the appropriate tabs. For attribute information, refer to the attribute tables in
this section.
Step 4 Save and apply the network object by clicking the Save and Apply buttons.
Note Attribute fields in the Subset Viewer can be added, modified and deleted if required. Refer
to the section Customization in Chapter 3, “GUI Navigation,” for more information on
customizing the Subset Viewer.
Deleting a Service Element Profile
To delete a Service element profile, complete the following steps:
Step 1 From the Root Tree Viewer choose Equipment Module > Cisco NI1 DSLAM Equipment Module >
Cisco NI1 ATM-ATM Cross-Connect Profile > Service Element Profile.
Step 2 Click the Delete button on the toolbar.
Step 3 Apply the Transaction by clicking the Apply button on the toolbar.
DSL Physical Port Profile Attributes
The DSL physical port profile provides you with access to the additional attributes that you can
configure for a Cisco 6100/6130 DSL physical port. The information you provide in the physical port
profile is communicated back to the Cisco 6100/6130 through the Equipment Module and helps to define
the type of service you are provisioning in the network.
Figure 6-1 shows the Cisco 6100/6130 DSL Physical Port Profile Object Viewer.