Filter
Top Products
6-7
Cisco Provisioning Center User’s Guide
78-11339-01
Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module
Initial System Upload
Transit Cost This is the cost of crossing the
sub-network. This attribute is
used by the Threader to
determine the lowest cost path
when threading a service.
(Mandatory)
0-2147483647 1000
Node Type This specifies the equipment
type.
Text string (up to
24 characters)
CiscoDSLAM6
100/6130
Class The CPC class name for the node
object.
C1nd*
Containing Region The name of the administrative
area containing the node (a
LATA, for example).
Text string (up to
32 characters)
Geographical
Location
This is the geographical location
of the node (for example, a GPS
reference).
Text string (up to
32 characters)
Organizational
Location
This is the organizational
location of the node (for
example, a Cisco 6100 directory
reference).
Text string (up to
64 characters)
Pre-provisioned Not supported in this release. Init, Full, None None*
Cisco SNMP
Connection Mode Specifies whether this switch is
configured for a direct or pooled
connection mode.
Direct, Pooled Direct
SNMP community
name
SNMP community string for
accessing the MIB (public for
read and private for write).
Text string (up to
32 characters)
private
Table 6-3 Cisco 6100/6130 Node Object Attributes (continued)
Attribute Description Acceptable
Values
Default Values