Filter
Top Products
6-25
Cisco Provisioning Center User’s Guide
78-11339-01
Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module
Working with Service Element Profiles
ATM-ATM Cross Connection Service Element Profile Attributes
The ATM-ATM Cross Connection Service element profile provides you with access to the additional
attributes that you can configure for a Cisco 6100/6130 ATM Cross Connect service through the Cisco
6100/6130 DSLAM. The ATM cross-connection object represents a cross connect between two ATM
logical ports in the same node. This Service object can be a VC between a DSL port and a Network
Interface (NI) port and also between subtending NI ports. The information you provide in the Service
element profile is communicated to the Cisco 6100/6130 DSLAM through the Equipment Module and
helps to define the type of service you are provisioning in the network. If you do not create Service
element profiles, the Equipment Module will communicate the values specified in the default Service
element profile.
Figure 6-3 shows the Cisco 6100/6130 ATM-ATM Cross-Connection Profile Object Viewer.
Local Management Interface
Management
Protocol
Specify the management
protocol that will be used
to manage the logical port.
None, ILMI None
Attributes
srchanmap This attribute is not
supported in this release
Text string (up to 38
characters)
Table 6-5 Cisco 6100/6130 ATM Logical Port Profile Attributes (continued)
Attribute Description Acceptable Values Default Values