Filter
Top Products
6-4
Cisco Provisioning Center User’s Guide
78-11339-01
Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module
Initial System Upload
Step 4 Run the following commands in succession to source the Server environment and start the CPC Server:
cd /opt/SY/Activator/Server/mng/utility
. syccpovdef
SYnpt -sS
Initial System Upload
In order to provision services, the CPC database must have detailed knowledge of the managed
subnetworks. Using a procedure called upload, objects are created within the CPC database that
represent objects of the managed network.
Note The term upload does not refer to the creation of inter-network links because they are
outside the scope of any single Equipment Module. For more information on adding
inter-networking links, see the section titled “Adding Inter-Network Links (Topology)
Information” in this chapter.
CPC supports the following types of upload:
• fabric (nodes, DSL physical ports, WAN physical ports, WAN subtending ports, ATM logical ports)
• Service (ATM cross connections)
• fabric and Service (all)
For the Cisco 6100/6130 NI-1 Equipment Module you can upload many nodes at once (network upload)
or an individual node at a time. CPC supports the following upload scenarios:
• Given a network object, upload just the fabric elements for the nodes in that network.
• Given a network object, upload just the Service elements for the nodes in that network.
• Given a network object, upload all the fabric and Service elements for the nodes in that network.
• Given a node object, upload just the fabric elements for that node.
• Given a node object, upload just the Service elements for that node.
• Given a node object, upload all fabric and Service elements for that node.
Note The upload function takes precedence over any Transactions that are running at the time of
upload. If the upload function makes a change back to the fabric that affects a running
Transaction (such as deleting a logical port that the Threader has decided to use) then this
Transaction fails and must be restarted.
Network and node objects must be created in order to perform an Upload.